Blasting machine maintenance procedures

Daily maintenance

1. Whether the fixing bolts of all projectile blasters and the motor of the projectile blaster are loose, if they are found to be loose, fasten them immediately.

2. Wear resistant parts inside the shot blasting machine and the protection plate inside the shot blasting machine, and replace the worn parts in time.

3, check the blade, wear half must be replaced.

4. Check whether the pointer position of the directional sleeve is correct.

5. Check whether the inspection door of the shot blasting machine is closed tightly.

6. There is no air leakage in the dust removal pipeline, and there is no dust or damage to the filter bag in the dust remover.

7. The spiral shell of the separator and the filter screen should be cleaned in time if there is any accumulation or other sundries.

8, check the belt tension, bolts, joints of the hoist is appropriate, whether the deviation and wear.

9. Check whether all limit switches and proximity switches are normal.

10. Check whether the signal indicator lights on the control board work normally

11. Check whether the shot blasting motor current is within the rated range.

12. Clean the dust on the electrical control box.

13. Check whether the total amount of pellet materials in the pellet bin is sufficient, and add if it is insufficient.


Post time: Apr-12-2019
WhatsApp Online Chat !